Forum Home
Press F1
 
Thread ID: 56646 2005-04-11 08:46:00 ADSL questions robsonde (120) Press F1
Post ID Timestamp Content User
343699 2005-04-11 08:46:00 got my ADSL set up today.

have every thing running just the way i want.

my question is what is the dB numbers mean in the router setup?
I see from the help info it is all about signal strength and power.

what is a normal number to have? what is very high? what is very low?

Downstream Upstream
Attenuation 18.0dB 19.0dB
Connection rate 2560 Kbps 160 Kbps

these numbers normal?

my connection is running fine i just like to know what it is all about.
robsonde (120)
343700 2005-04-11 09:48:00 Attenuation is the amount of signal that is lost over a length of a cable. Copper cables will always have some attenuation at normal temperate ranges, this is a fact world wide, and this is the big limiting factor for providing ADSL. Attenuation on a perfectly made piece of copper cable with no joints in predictable, hence why distance is often quoted as the limit. People who have ADSL hardware connected to their line can often measure the attenuation. Roughly the limits are: 2Mbps, under 43dB attenuation, 1Mbps, under 60dB
attenuation.
As for your connection rate, depends which speed plan you chose.
You can test your spped here:
www.jetstreamgames.co.nz/speed.
pctek (84)
343701 2005-04-11 11:32:00 what is a normal number to have? what is very high? what is very low?

Downstream Upstream
Attenuation 18.0dB 19.0dB
Connection rate 2560 Kbps 160 Kbps

these numbers normal?
Yours are better than mine

Downstream Upstream
Attenuation 31.0dB 63.0dB
Connection rate 3296 Kbps 320 Kbps

We used to run a $2 shop 10 metre phone extension to the modem sitting next to the computer but recently switched it around on suggestion from someone. Now the modem is next to the phone jack in the other room and a network cable runs from it to this computer. Attenuation didnt seem to get any better though :/ I'd say yours are very good.
sal (67)
343702 2005-04-12 08:31:00 next question....
the 10Gb cap is per month...

is that per 27 day billing cycle or per calander month??
robsonde (120)
343703 2005-04-12 08:40:00 next question....
the 10Gb cap is per month...

is that per 27 day billing cycle or per calander month??

That is per billing cycle :thumbs:
Overdrive_5000 (4950)
343704 2005-04-12 09:08:00 next question....
the 10Gb cap is per month...

is that per 27 day billing cycle or per calander month??
Mine is per calendar month.
Period MB
02 Mar 2005 - 01 Apr 2005 1348.24
02 Feb 2005 - 01 Mar 2005 1403.05
02 Jan 2005 - 01 Feb 2005 3020.99
02 Dec 2004 - 01 Jan 2005 1673.61
02 Nov 2004 - 01 Dec 2004 1259.35
pctek (84)
343705 2005-04-12 09:47:00 Just checked mine and it appears that it is billed by calendar month as pctek stated in his post Overdrive_5000 (4950)
1