| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 58266 | 2005-05-27 00:26:00 | Any places in NZ selling the Speed Strip? | wintertide (1306) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 358786 | 2005-05-27 00:26:00 | I'm looking for the Speed Strip for my Athlon processor (they unlock the multiplier on the processor) but so far cannot find a seller in NZ. Anyone know if there IS someone who sells them in NZ or can get them in? Explanation of Speed Strip: www.overclockercafe.com Thanks. |
wintertide (1306) | ||
| 358787 | 2005-05-27 02:29:00 | I haven't seen any of these in NZ at all. You could try ordering from overseas. | Jeremy (1197) | ||
| 358788 | 2005-05-27 03:27:00 | You might have to pull the (pencil) lead out after all. | Murray P (44) | ||
| 358789 | 2005-05-27 04:52:00 | Nah, don't want to try the cutting and painting of the bridges - I don't want to risk blowing my equipment (esp the motherboard) :s so that's why I was looking for NZ sellers of the strip... thanks Jeremy and Murray P, may have to buy from overseas after all :( | wintertide (1306) | ||
| 358790 | 2005-05-27 05:32:00 | Use an ordinary lead pencil , you can reverse it with an eraser. it will depend on your model and revision as to whether you can use the pencil trick, though you could still fill pits and use a pencil rather than paint or pins. | Murray P (44) | ||
| 1 | |||||