| Post ID |
Timestamp |
Content |
User |
| 1386249 |
2014-10-13 22:07:00 |
I’m putting together an i5 4690 with a MSI Z97 U3 Plus motherboard and I have an Antec 750 watt power supply. When I push the power button on my case nothing happens. A couple of times it tune on for half a second then die. I have a good power cord. I have the 6 pin plug into the motherboard because it won’t take all 8 pins and I doubled check my power switch which the lettering is supposed to face the outside of the board. Any suggestion? |
lostsoul62 (16011) |
| 1386250 |
2014-10-13 22:30:00 |
You DONT put the 6 pin plugs in, they are for Graphic Cards, and will have the Letters PCI on them
The Actual Power Supply Feed will have 8 pins. Just checked that PSU and it does have a 8 pin connector. |
wainuitech (129) |
| 1386251 |
2014-10-13 23:13:00 |
I needed to put in both of the 4 CPU pins. |
lostsoul62 (16011) |
| 1386252 |
2014-10-13 23:16:00 |
Thats about right, :) most of the 8 pined plugs for the power are split on the same cable and will snap together to make the 8 pin, this is so any motherboards that still have only a 4 socket connection will be pinned correctly. |
wainuitech (129) |
| 1 |
|