| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 58950 | 2005-06-17 02:06:00 | Good help/tutorial sites for building a comp? | bigmit37 (7537) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 364486 | 2005-06-17 02:06:00 | This is my first time building a computer and all of my parts just arrived. I was just wondering if there is a good basic tutorial guide online for building a computer. I am going to follow most of the instructions given with my case (made sure it was a good case and had descent instructions) but just incase I need some additional help. Thanks guys for your help. |
bigmit37 (7537) | ||
| 364487 | 2005-06-17 06:05:00 | Dunno about online but PCWorld mags have had various how to articles in them about installing all the various bits. Your motherboard book should show a fair bit of it, and often there is a pamphlet in the CPU box too. What case is it??? A lot of them have marked on the bottom ATX MATX etc, which shows you were to put in the risers for the board. Like if it is an ATX board or MicroATX etc. |
pctek (84) | ||
| 364488 | 2005-06-17 06:55:00 | Hi Went through the same myself, and after a bit of a Google came up with a couple of helpful sites. Would have posted them if I could remember or find them. Back issues of PC world also proved helpful. Good luck Sookie |
sookie_72 (8256) | ||
| 364489 | 2005-06-17 07:50:00 | build a pc into google will bring up eleventymillion sites |
bartsdadhomer (80) | ||
| 364490 | 2005-06-17 09:39:00 | Here is the collection of PC building sites I have in my bookmarks. Not sure which one was the most useful to me so I'll leave you to find which is best for you. www.omnicast.net www.pcmech.com www.hardwarecentral.com http://www.buildyourown.org.uk/ www.daileyint.com www.firingsquad.com Actually I just remembered that the following site is my favourite one. ;) homepage.ntlworld.com |
FoxyMX (5) | ||
| 364491 | 2005-06-30 21:13:00 | Whoa! THanks I got a few sites from someone also! I wish I looked at these earlier but I am pretty much done now....Much harder then I expected well the bios and configurations part. I used a DFI NF4 Ultra Lan party motherboard and that doesn't seem to be too beginner friendly... But thank you for your help :thumbs: |
bigmit37 (7537) | ||
| 364492 | 2005-06-30 23:34:00 | Actually I just remembered that the following site is my favourite one. ;) homepage.ntlworld.com Classic. Very funny. I hope nobody actually tries that though :stare: |
lazydog (148) | ||
| 1 | |||||