Forum Home
Press F1
Thread ID: 138258	2014-10-31 00:13:00	Blue song headset thingies	ianhnz (4263)	Press F1

Post ID	Timestamp	Content	User
1387411	2014-10-31 00:13:00	Hi guys. I got one of those cellphone, headphone thingies but have no idea how to connect it up. Been sitting in draw, for long time and have no instructions. en.santiantek.com Any assistance really appreciated, Ian.	ianhnz (4263)
1387412	2014-10-31 00:20:00	Most of the time there will be a mode to "Pair" it which will put it into "Pairing mode" for 2 minutes. Fire up your phone then, tell it to search while the device is in Pairing Mode and choose it. If it asks for a PIN it's usually 0000 or 1234. Then your phone will automagically use it :) Easy! :)	Chilling_Silence (9)
1387413	2014-10-31 00:23:00	Most of the time there will be a mode to "Pair" it which will put it into "Pairing mode" for 2 minutes. Fire up your phone then, tell it to search while the device is in Pairing Mode and choose it. If it asks for a PIN it's usually 0000 or 1234. Then your phone will automagically use it :) Easy! :) Did a search and phone beside it. Comes up with No device found, etc. I seem it recall something about pressing a button, or something, on headset???	ianhnz (4263)
1387414	2014-10-31 01:09:00	I only see the phone button in the pic, try pressing and holding it for a few secs to see if a light starts blinking or it beeps or something, then search with the phone. If not see if there is another button somewhere to put it into pairing mode. If it's another button it may have the bluetooth logo maybe.	dugimodo (138)
1387415	2014-10-31 01:14:00	Actually just noticed on the page you linked towards the bottom right is a link to the product manual Here's a cut & paste (not my bad English) Pairing Before you use this Bluetooth headset, you have to make this headset to connect with your mobile or the other BT device, which step we call pairing. Only after successful pairing, it could be used, now for example ： 1.Before pairing , make your headset power off.（Do it according to the Part Power off） 2. Press Multi-Function key for 5-7 seconds, until you find the blue indicator and the red indicator flicker alternant. 3.Keep your Bluetooth function on in your mobile ， and search your Bluetooth headset modle. 4.Once your mobile search the headset name out, please choose “Yes” or “Confirm” to connect with it. 5.Entry the password “0000”, and confirm it again, then you can pair successfully（some mobiles don’t need the password）.	dugimodo (138)
1387416	2014-10-31 02:24:00	This may sound daft, but its one thing many people get stuck with. Make sure its fully charged before usage or trying to connect /Pair. The first two devices I had like that took several hours of charging before they worked correctly. Generally you charge by the USB port on the side connected to your Computer. As per the Badly Written Manual ( as Dugimodo mentioned) Headset charging The battery in the Bluetooth headset can be charged. Please make the battery fully charged at the first time using. 1.Use USB cable to connect with your computer or 5V, 300-500mA device. 2.During the charging, the red indicator on the Bluetooth headset will last always until fully charging.。 3. The charging time will last 1.5 hour, when the charging is finished, the indicator will turn off. Attention ： Please charge your headset when the indicator become red from blue during working state.(the headset could not be used when it is charging)	wainuitech (129)
1387417	2014-10-31 08:21:00	Make sure its fully charged before usage or trying to connect /Pair. The first two devices I had like that took several hours of charging before they worked correctly. Generally you charge by the USB port on the side connected to your Computer. x2	Agent_24 (57)
1387418	2014-11-01 23:55:00	Hi guys. I left it charging over night and most of the day before and followed the comments above. Said it seen it so paired and put pin in. Made a call but headset was dead. Unpaired and repaired, this time I push the go button and it dialed the last number I dialed, but still no sound. So I guess it's back in the draw, again. Thanks for the helps, Ian	ianhnz (4263)
1